Special Tools Required

Relay Puller 07AAC-000A2A1 or 07AAC-000A1A0

Use this chart to identify the type of relay, then do the test listed for it.

RELAY REFERENCE TABLE

Relay

Test

A/C compressor clutch relay*⁽¹⁾

Normally-open type A

A/C condenser fan relay*⁽¹⁾

PGM-FI subrelay⁽¹⁾

Cargo area accessory power socket relay⁽¹⁾

Console accessory power socket A relay⁽¹⁾

Console accessory power socket B relay⁽¹⁾

Front accessory power socket relay⁽¹⁾

Driver's seat heater relay (HIGH)⁽¹⁾

ETCS control relay⁽¹⁾

Front blower motor relay⁽¹⁾

Fog light relay⁽¹⁾

Front passenger's seat heater relay (HIGH)⁽¹⁾

Hatch glass relay⁽¹⁾

Headlight high beam relay⁽¹⁾

Ignition coil relay⁽¹⁾

Left second row seat heater relay (HIGH)⁽¹⁾

PGM-FI main relay 1⁽¹⁾

PGM-FI main relay 2 (FUEL PUMP)⁽¹⁾

Power window relay⁽¹⁾

Radiator fan relay⁽¹⁾

Rear blower motor relay ('11 model)

Rear window defogger relay⁽¹⁾

Right second row seat heater relay (HIGH)⁽¹⁾

Starter cut relay 1⁽¹⁾

Starter cut relay 2 ⁽¹⁾

VTM-4 relay⁽¹⁾

Trailer lighting relay⁽¹⁾

Trailer IG2 relay⁽¹⁾

Rear blower motor relay ('09-10 models)

Normally-open type B

Active control engine mount (ACM) control relay⁽¹⁾

Five-terminal type

ACC cut relay⁽¹⁾

Driver's seat heater relay (LOW)⁽¹⁾

Fan control relay⁽¹⁾

Front passenger's seat heater relay (LOW)⁽¹⁾

IG2 cut relay⁽¹⁾

Left second row seat heater relay (LOW)⁽¹⁾

Rear window wiper motor relay 1 (forward)

Rear window wiper motor relay 2 (backward)

Right second row seat heater relay (LOW)⁽¹⁾

⁽¹⁾	Carefully remove the relay from fuse/relay box using the relay puller. Do not use pliers. Pliers will damage the relay.

Fig 1: Identifying Fuse & Relay Box

G05966196

Courtesy of AMERICAN HONDA MOTOR CO., INC.