LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Pilot EX, 3.5 4 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Drive Belt Replacement

Drive Belt Replacement

  1. Set a socket wrench on the drive belt auto-tensioner, and slowly turn the wrench in the direction shown below, then remove the drive belt.
    NOTE: This is a hydraulic type auto-tensioner, so you must turn the wrench slowly for at least 3 seconds.
    Fig 1: View Of Drive Belt With Wrench
    G05960735Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the new belt in the reverse order of removal.
scientia non olet · About LEMON Manuals