Fuel Pressure Regulator Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL AND INSTALLATION ).
Remove the bracket (A).

Fig 1: Identifying Bracket, Clip, Fuel Pressure Regulator And O-Rings
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the clip (B).
Remove the fuel pressure regulator (C).
Install the parts in the reverse order of removal with new O-rings (D).

NOTE:

Coat the O-rings with clean engine oil. Do not use any other oil or fluid.
Do not pinch the O-rings during installation.
Use all the new parts supplied in the pressure regulator replacement kit.