LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Assembly (V6)) >> Front Engine Mount Removal and Installation >> Removal

Front Engine Mount Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C condenser fan shroud assembly, then remove the radiator fan shroud assembly (see FAN, FAN MOTOR, AND SHROUD REMOVAL AND INSTALLATION ).
  2. Lift and support the engine with a jack and a wood block under the engine/transmission.
  3. Remove the front engine mount stop (A), then remove the front engine mount bolt (B).
    Fig 1: Identifying Front Engine Mount Stop And Front Engine Mount Bolt
    G06419063Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two bolts (A) securing the ATF cooler pipe bracket.
    Fig 2: Identifying ATF Cooler Pipe Bracket Bolts, Engine Mount Actuator Connector And Front Engine Mount
    G06419064Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the engine mount actuator connector (B), then remove the front engine mount (C).
scientia non olet · About LEMON Manuals