LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Maintenance (V6)) >> Maintenance Sub Items

Maintenance Sub Items

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
MAINTENANCE SUB ITEMS REFERENCE

Number Maintenance Sub Items
1 Rotate tires, and check tire inflation and condition
Follow the pattern shown in the Owner's Manual.
2 Replace air cleaner element (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT )
If the vehicle is driven primarily in dusty conditions, replace every 15, 000 miles (24, 000 km).
Replace dust and pollen filter (see DUST AND POLLEN FILTER REPLACEMENT )
  • If the vehicle is driven mostly in areas that have high concentrations of dust, pollen, or soot in the air, replace every 15, 000 miles (24, 000 km).
  • Replace the filter whenever airflow from the heating and air conditioning system is less than normal.
Inspect drive belt (see DRIVE BELT INSPECTION )
Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.
3 Replace automatic transmission fluid (see ATF REPLACEMENT ) and transfer fluid (4WD models) (see TRANSFER ASSEMBLY FLUID REPLACEMENT )
  • Automatic transmission fluid capacity

    2WD: 3 3 L (3 5 US qt), 4WD: 2.8 L (3.0 US qt); use Honda ATF-Z1.

  • Transfer fluid capacity 0.41 L (0 43 US qt); use hypoid gear oil GL4 or GL5.
4 Replace spark plugs (see SPARK PLUG INSPECTION )
Use ILZKR7B11 (NGK) or SXU22HCR11 (DENSO).
Replace timing belt (see TIMING BELT REPLACEMENT ) and inspect water pump (see WATER PUMP INSPECTION )
If the vehicle is regularly driven in very high temperature over 110°F (43°C) or in very low temperature under -20 °F (-29 °C), or towing a trailer, replace timing belt every 60, 000 miles (100, 000 km).
Inspect valve clearance (cold) (see VALVE CLEARANCE ADJUSTMENT )
Intake: 0.20-0 24 mm (0.0079-0.0094 in). Exhaust: 0.28-0.32 mm (0.0110-0.0126 in)
5 Replace engine coolant (see COOLANT CHECK )
Capacity (including reservoir): 6.6 L (1.74 US gal); use Honda Long Life Antifreeze/Coolant Type 2.
6 Replace rear differential fluid (4WD models) (see REAR DIFFERENTIAL FLUID INSPECTION AND REPLACEMENT )
Capacity 1.2 L (1.3 US qt); use Honda Dual Pump Fluid II.