LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Wipers/Washers) >> Wiper Motor Replacement >> Installation

Wiper Motor Replacement: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before installing the motor, connect the 5P connector to the wiper motor, and turn the windshield wiper/washer switch ON to (LO) or (HI) position, then OFF to return the motor shaft to the park position.
    NOTE:
    • Do not use the windshield wiper/washer switch (INT) position in this step.
    • Apply multipurpose grease to the moving parts.
  2. Install the wiper motor to the wiper linkage assembly in the reverse order of removal.
  3. Install the linkage to the wiper motor shaft, then align the wiper linkage assembly.
    Fig 1: Aligning Wiper Linkage Assembly
    G06969928Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. After installation, adjust the wiper arms (see WINDSHIELD  ).
scientia non olet · About LEMON Manuals