LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (VSA (Vehicle Stability Assist) System Components) >> Yaw Rate-Acceleration Sensor Replacement

Yaw Rate-Acceleration Sensor Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not damage or drop the sensor as it is sensitive.
  • Do not use power tools when replacing the sensor.
  • Check the sensor bracket for a deformation.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the center lower console (see RADIO POCKET REMOVAL/INSTALLATION ).
  3. Remove the yaw rate-acceleration sensor (A).
    Fig 1: Yaw Rate-Acceleration Sensor With Connector And Mounting Bolt Torque Specification
    G06969825Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the yaw rate-acceleration sensor 4P connector (B).
  5. Install the yaw rate-acceleration sensor in the reverse order of removal.
  6. Do the VSA sensor neutral position memorization (see VSA SENSOR NEUTRAL POSITION MEMORIZATION  ).
scientia non olet · About LEMON Manuals