LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Variable Cylinder Management (VCM) System) >> Front Rocker Arm Oil Pressure Switch Removal/Installation

Front Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 7 on ENGINE REMOVAL ).
  2. Disconnect the front rocker arm oil pressure switch 1P connector (A).
    Fig 1: Front Rocker Arm Oil Pressure Switch And 1P Connector And O-Ring With Torque Specifications
    G06966623Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the front rocker arm oil pressure switch (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals