License Plate Light Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Push the license plate light (A) to the side to release the retaining spring, and pull out the license plate light.

Fig 1: Identifying License Plate Light
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (A) from the light.
License Plate Light: 5 W

Fig 2: Identifying 2P Connector, Lens And Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Separate the lens (B) and the housing (C), then remove the bulb (D).
Install the license plate light in the reverse order of removal.