Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 2+0.5/-1 mm (0.08+0.02/-0.04 in.) at the center of the glass opening. If not, make the following adjustment:

Fig 1: Identifying Roof Panel & Glass Weatherstrip

Courtesy of AMERICAN HONDA MOTOR CO., INC.

1. Remove the skylight.
2. For front height: On both glass brackets (A), using a TORX T30 bit, loosen the bolts (B), and install a shims (C) between the glass frame (D) and glass bracket.

   Shim: Thickness 2 mm (0.08 in.) max. A. 

   Fig 2: Shims Between Glass Frame & Glass Bracket With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. For rear height: On the glass latch (A), loosen the nuts (B), and install a shim (C) between the glass frame (D) and glass latch.

   Shim: Thickness 1 mm (0.04 in.) max. 

   Fig 3: Shim Between Glass Frame & Glass Latch With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install the skylight.
5. Check that the latch handle works smoothly.
6. Lock the skylight securely, and recheck the glass position alignment, and check for water leaks.