LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Engine Block) >> Oil Pan Removal

Oil Pan Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the engine is already out of the vehicle, go to step  6
  2. Raise the vehicle on the lift.
  3. Drain the engine oil (see ENGINE OIL REPLACEMENT ).
  4. Remove the inner fender (see FRONT INNER FENDER REPLACEMENT ).
  5. Remove exhaust pipe A (see step 31 in ENGINE REMOVAL ).
  6. Remove the rear warm up TWC bracket.
    Fig 1: Identifying Rear Warm Up TWC Bracket And Exhaust Pipe
    G06966438Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Remove the CKP sensor cover (A) and the bolt (B), then disconnect the CKP sensor connector (C).
    Fig 2: Identifying CKP Sensor Connector, CKP Sensor Cover And Mounting Bolt
    G06966439Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Remove the torque converter case cover (A) and the four bolts (B) securing the transmission.
    Fig 3: Identifying Torque Converter Case Cover With Mounting Bolts
    G06966440Courtesy of AMERICAN HONDA MOTOR CO., INC.
  9. Remove the bolts securing the oil pan.
  10. Using a flat blade screwdriver, separate the oil pan from the engine block in the places shown.
    Fig 4: Identifying Oil Pan Separating Position
    G06966441Courtesy of AMERICAN HONDA MOTOR CO., INC.
  11. Remove the oil pan.
scientia non olet · About LEMON Manuals