Glass Latch Bracket Replacement

Remove these items:
- Skylight
- Rear roof trim (see D-PILLAR TRIM/REAR ROOF TRIM )
- Roof trim (see step 5 on HEADLINER REMOVAL/INSTALLATION )
- Glass latch handle trim (see step 4 on HEADLINER REMOVAL/INSTALLATION )
Pull down the headliner as necessary. Take care not to bend the headliner excessively, or you may crease or break it.
Remove the screws (A, B), then remove the latch bracket (C).

Fig 1: Latch Bracket Screws With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the bracket in the reverse order of removal, and make sure the guide projection (D) is installed into the elongated hole (E) properly.