LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> CR-V EX, 2.4 RE4 >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch Replacement >> Driver's

Power Window Switch Replacement: Driver's

  1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 22P connector (A) from the power window master switch (B).
    Fig 1: Locating 22P Connector And Power Window Master Switch
    G06612285Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the four screws and the power window master switch.
    Fig 2: Identifying Screws And Power Window Master Switch
    G06612286Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the switch in the reverse order of removal.
  5. After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).
scientia non olet · About LEMON Manuals