LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Rear Differential) >> VTM-4 LOCK Switch Test/Replacement

VTM-4 LOCK Switch Test/Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector from the VTM-4 LOCK switch, then remove the VTM-4 LOCK switch.
    Fig 1: Identifying VTM-4 Lock Switch And 7P Connector
    G05594501Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position as shown (see Fig 2). If the switch fails any continuity check, replace the switch.
    Fig 2: Checking For Continuity Between Terminals In Each Switch Position
    G05594502Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals