LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (PGM-FI System) >> IAT Sensor Replacement

IAT Sensor Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 1 under IGNITION COIL REMOVAL/INSTALLATION ).
  2. Disconnect the IAT sensor 2P connector (A).
    Fig 1: IAT Sensor With Torque Specifications
    G05593768Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the IAT sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals