LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (PGM-FI System) >> CMP Sensor Replacement

CMP Sensor Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt:

    J35A9 engine (see TIMING BELT REMOVAL )

    J35Z1 engine (see TIMING BELT REMOVAL )

  2. Remove the front camshaft pulley (CMP sensor pulse plate) (A).
    Fig 1: Front Camshaft Pulley (CMP Sensor Pulse Plate) With Torque Specifications
    G05593771Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the CMP sensor connector (B), then remove the back cover (C).
  4. Remove the CMP sensor (A) from the back cover.
    Fig 2: CMP Sensor With Torque Specifications
    G05593772Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal. Install the timing belt:

    J35A9 engine (see TIMING BELT INSTALLATION )

    J35Z1 engine (see TIMING BELT INSTALLATION )

  6. Do the CKP pattern clear/CKP pattern learn procedure (see CRANK (CKP) PATTERN CLEAR/CRANK (CKP) PATTERN LEARN ).
scientia non olet · About LEMON Manuals