LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (PGM-FI System) >> CKP Sensor Replacement

CKP Sensor Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the auto-tensioner to remove tension from the drive belt, then remove the belt:

    J35A9 engine (see DRIVE BELT REPLACEMENT )

    J35Z1 engine (see DRIVE BELT REPLACEMENT )

  2. Remove the crankshaft pulley:

    J35A9 engine (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION )

    J35Z1 engine (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION )

  3. Remove the upper and lower front covers from the engine:

    J35A9 engine (see step 9 under TIMING BELT REMOVAL )

    J35Z1 engine (see step 9 under TIMING BELT REPLACEMENT )

  4. Remove the CKP sensor (A) from the oil pump.
    Fig 1: CKP Sensor With Torque Specifications
    G05593770Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal.
  6. Do the CKP pattern clear/CKP pattern learn procedure (see CRANK (CKP) PATTERN CLEAR/CRANK (CKP) PATTERN LEARN ).
scientia non olet · About LEMON Manuals