DTC 92: F-CAN System
- Check the PGM-FI DTCs (see DTC TROUBLESHOOTING INDEX
).
Are any DTCs indicated?
YES -Troubleshoot the PGM-FI DTCs, then recheck.
NO -Go to step 2.
- Clear the DTCs with the HDS (see HOW TO RETRIEVE DTCS ).
- Turn the ignition switch OFF, then turn it ON (II).
- Connect the HDS, and check for DTCs with the HDS (see HOW TO RETRIEVE DTCS
).
Does the VSA indicator come on, and is DTC 92 indicated?
YES -Check for loose terminals in the VSA modulator-control unit 46P connector. If connections are good, replace the VSA modulator-control unit (see VSA MODULATOR-CONTROL UNIT REMOVAL AND INSTALLATION ).
NO -Intermittent failure, the system is OK at this time.