LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Registration for Immobilizer System

Registration for Immobilizer System

  1. Turn the ignition switch ON (II).
  2. Connect the HDS to the data link connector.
  3. Select IMMOBILIZER from the SYSTEM SELECT menu.
  4. Select the suitable menu from the HDS indications as follows.
    NOTE: The immobilizer control unit-receiver can store up to six transponder codes.
    IMMOBILIZER SYSTEM REGISTRATION INFORMATION

    Added or replaced part Necessary operation after entering the Immobilizer Setup menu by the HDS Prepared part(s) when registered Information needed
    Replace any of the keys Select "KEYS", then "REWRITE KEYS"
    • All registered keys
    • All new keys
    		 HDS 1st password
    Add a key Select "Keys", then "Add 1 Key"
    • A registered key
    • A new key
    		 HDS 1st password
    Add keys Select "Add and Delete Keys", then "Delete or Add Multiple Keys"
    • All registered keys
    • All new keys
    		 HDS 1st password
    Deleting the registration of lost keys Select "KEYS", then "REWRITE KEYS" All new keys HDS 1st password
    All keys are lost.
    Replace all keys.    		 Select "KEYS", then "ALL KEYS LOST" All new keys PCM code
    The immobilizer control unit-receiver is replaced. Select "REPLACE IMMOBI UNIT" All registered keys PCM code
    PCM is replaced. Select "REPLACE ECM/PCM" One registered key PCM code
    The steering lock assembly is replaced (also all transponder is replaced and registered). Select "KEYS", then "ALL KEYS LOST" All registered keys PCM code
    Replace the imoes unit ('07-08 Canada models, '08 USA models) Select "Replace IMOES" One registered key PCM code
scientia non olet · About LEMON Manuals