Audio Disc Changer Removal/Installation

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.
Eject all the CDs before removing the audio unit and CD changer to prevent damaging the CD player's load mechanism.

Make sure you have the anti-theft codes for the audio system and the navigation system.
Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION f).
Remove the bolts, then pull out the audio unit (A) and navigation display (6).

Fig 1: Removing/Installing Audio Unit And Navigation Display
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (D), then remove the audio unit.
Remove the bolts, and the CD changer (A).

Fig 2: Removing/Installing CD Changer At Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the CD changer in the reverse order of removal, and note these items:
- Make sure all connectors and the antenna lead are secure.
- Enter the anti-theft codes for the audio system and the navigation system.