Fuel Pressure Regulator Replacement
WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL/INSTALLATION ).
- Remove the clip (A).
- Remove the fuel pressure regulator (B).
- Install the regulator in the reverse order of removal with new O-rings (C).NOTE:
- Coat the O-rings with clean engine oil. Do not use any other oils.
- Be careful not to pinch the O-rings when you install the fuel regulator.