DTC B1152: Gauge Control Module EEPROM Error
WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Clear the DTCs with the HDS.
- Start the engine.
- Check for DTCs with the HDS.
Is DTC B1152 indicated?
YES - Go to step 4.
NO - Intermittent failure. The gauge control module is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition (see BATTERY TEST ), and the charging system.
- Disconnect the gauge control module connectors, then reconnect them.
- Check for DTCs with the HDS.
Is DTC B1152 still indicated?
YES - Faulty gauge control module; replace the gauge control module (see GAUGE CONTROL MODULE REPLACEMENT ).
NO - Intermittent failure. The gauge control module is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition (see BATTERY TEST ), and the charging system.