LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Ridgeline RTL >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Charging System) >> Drive Belt Replacement >> J35Z1 Engine

J35Z1 Engine

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set a hexagon socket wrench in to the drive belt auto-tensioner (A), and slowly turn the wrench in the direction shown in Fig 1, then remove the drive belt.
    NOTE: This is a hydraulic type auto-tensioner, so you must turn the wrench slowly.
    Fig 1: Removing Drive Belt - J35Z1 Engine
    G04244468Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the new belt in the reverse order of removal.
    NOTE: For belt routing, see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING 
scientia non olet · About LEMON Manuals