Alternator Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.

Install the alternator.

Fig 1: Installing Alternator With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect the alternator connector (A) and the BLK wire (B) to the alternator.

Fig 2: Connecting Alternator Connector And BLK Wire To Alternator With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the bracket (C), then install the harness clamp (D).
Install the drive belt (see DRIVE BELT REPLACEMENT ).
Install the intake manifold cover (see step 1 in IGNITION COIL REMOVAL/INSTALLATION ).
Connect the positive cable to the battery first, then connect the negative cable.
Enter the anti-theft codes for the radio and the navigation system, then enter the customer's audio presets.
Do the power window control unit reset procedure (see RESETTING THE POWER WINDOW CONTROL UNIT ).
Set the clock (on vehivle without navigation).