Fuel Tank Unit Removal/Installation: Removal

Relieve fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the fuel fill cap.
Remove the driver's side second row seat (see SECOND ROW SEAT REMOVAL/INSTALLATION ).
Cut the carpet at the dotted line (A). Be careful not to cut the wire harness under the carpet.

Fig 1: Cutting Carpet At Dotted Line
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the access panel (A) from the floor, then disconnect the fuel pump 5P connector (B).

Fig 2: Removing Access Panel From Floor & Disconnect Fuel Pump 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the quick-connect fitting from the fuel tank unit.
Using the tool, loosen the fuel tank unit locknut (A).

Fig 3: Loosening Fuel Tank Unit Locknut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A) and fuel tank unit (B).

Fig 4: Removing Locknut & Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.