Ignition Switch Replacement

SRS components are located in the area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.

1. Do the battery terminal disconnection procedure, (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION )
2. Remove the steering column covers (see PASSENGER'S DASHBOARD TRIM VENT ).
3. Disconnect the 5P connector (A) from the ignition switch (B).
   Fig 1: Disconnecting 5P Connector From Ignition Switch

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Remove the two screws and the ignition switch.
5. Install the parts in the reverse order of removal.
6. Do the battery terminal reconnection procedure, (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION )