Passenger's Power Window Motor Test

Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the power window motor.
Front passenger's

Fig 1: Identifying 2P Connector - Front Passenger
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying 2P Connector - Rear
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to Fig 3. When the motor stops running, disconnect one lead immediately.

Fig 3: Connecting Battery Power And Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.