LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Odyssey EX >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Jet Bolt Inspection >> J35A7 engine

J35A7 engine

  1. Remove the oil jet bolt (see OIL JET REPLACEMENT ).
  2. Inspect the oil jet bolt as follows.
    • Make sure that a 0.6 mm (0.02 in.) diameter drill will go through the oil intake (0.7 mm (0.03 in.) diameter). Make sure the check ball (A) moves smoothly and has a stroke of about 4.0 mm (0.16 in.)
    • Check the oil jet bolt operation with an air nozzle. It should take at least 120 kPa (1.2 kgf/cm, 17 psi) to unseat the check ball.
    Fig 1: Identifying Check Ball
    G05523493Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals