LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Odyssey EX-L >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Recirculation Control Motor Replacement

Recirculation Control Motor Replacement

  1. Make sure the ignition switch is in LOCK (0).
  2. Remove the glove box housing (see LOWER GLOVE BOX REMOVAL/INSTALLATION ).
  3. Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor from the blower unit.
    Fig 1: Identifying 7P Connector And Recirculation Control Motor
    G05526238Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals