Under-hood Fuse/Relay Box: Removal
- Do the battery terminal disconnection procedure. (See BATTERY TERMINAL DISCONNECTION AND RECONNECTION )
- Remove the screws (A) for the alternator and battery cable terminals from the under-hood fuse/ relay box.
- Remove the two mounting bolts (B) from the under-hood fuse/relay box.
- Remove the bottom cover from the under-hood fuse/relay box.
- Disconnect the connectors from the under-hood fuse/relay box.
- Carefully remove the relays using the relay puller (see POWER RELAY TEST
) or by prying under the base of the relay.NOTE: Do not use pliers; pliers will damage the relays, which could cause the engine to stall or not start.