HFL Switch Removal/Installation

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

1. Remove the switch cover (A) from left side of the steering wheel.
   Fig 1: Identifying Switch Cover, HFL Switch, 5P Connector And Screws

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the two screws (B) from the HFL switch (C).
3. Disconnect the 5P connector (D) and remove the HFL switch.
4. Install the switch in the reverse order of removal.