LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Fit Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Block >> Oil Pan Removal

Oil Pan Removal

  1. M/T model: Remove the heat shield (see step 8 on DRIVESHAFT REMOVAL ).
  2. Remove the dipstick tube.
    Fig 1: Identifying Dipstick Tube
    G05454302Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the clutch cover/torque converter cover (A), and remove the bolts (B) securing the transmission.

    M/T model 

    Fig 2: Identifying Clutch Cover/Torque Converter Cover Bolts - M/T Model
    G05454303Courtesy of AMERICAN HONDA MOTOR CO., INC.

    A/T model 

    Fig 3: Identifying Clutch Cover/Torque Converter Cover Bolts - A/T Model
    G05454304Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the bolts/nuts securing the oil pan.
  5. Set the flat blade screwdriver as shown, and separate the oil pan from the engine block.
    Fig 4: Separating Oil Pan From Engine Block
    G05454305Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove the oil pan.
scientia non olet · About LEMON Manuals