LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Fit Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Rocker Arm Assembly Removal

Rocker Arm Assembly Removal

  1. Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL ).
  2. Loosen the rocker arm adjusting screws (A).
    Fig 1: Identifying Rocker Arm Adjusting Screws
    G05454236Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Bundle the intake rocker arms with rubber bands (A) to keep them together as a set. Unscrew the rocker shaft mounting bolts two turns at a time, in sequence below.
    Fig 2: Identifying Intake Rocker Arms With Rubber Bands
    G05454237Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the rocker shaft mounting bolts, then remove the rocker arm assembly (A).
NOTE: When disassembling the rocker arms, remove the dowel pin (B), then remove the rocker arm from cam chain side on the rocker shaft.
Fig 3: Identifying Rocker Arm Assembly And Dowel Pin
G05454238Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals