LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2008 >> Element LX, 2.4 YH2, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Gauges >> Gauge Control Module Replacement

Gauge Control Module Replacement

  1. Remove the driver's dashboard panel (see DRIVER'S DASHBOARD PANEL REMOVAL/INSTALLATION ).
  2. Place a clean shop towel under the gauge control module to prevent scratching the steering column or dashboard.
  3. Remove the four mounting screws from the gauge control module (A).
    Fig 1: Identifying Gauge Control Module
    G05451411Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the connector (B), and remove the gauge control module.
  5. Install the gauge control module in the reverse order of removal.
scientia non olet · About LEMON Manuals