Passenger's Power Window Switch Test/Replacement

Remove the passenger's power window switch (A).
Front passenger's

Fig 1: Identifying Front Passenger Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear

Fig 2: Identifying Rear Passenger Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE: The graphic shows the front passenger's door.

Fig 3: Identifying Front Passenger Door Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table below.

Fig 4: Identifying Terminal Continuity Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect battery power to the No. 4 terminal and ground the No. 7 (or No. 8) terminal. The switch light should come on.
If the continuity or switch light tests is not as specified, remove the screws and replace the switch.
Install the switch in the reverse order of removal.