Input Shaft (Mainshaft) Speed Sensor Replacement
- Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).
- Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the new O-ring (B) on the new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor in the transmission housing.
- Check the connector for rust, dirt, or oil, then connect the connector securely.
- Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).