LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Pilot EX, 3.5 YF1 >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> VSA OFF Switch Test

VSA OFF Switch Test

  1. Make sure the ignition switch OFF.
  2. Remove the switch panel (A).
    Fig 1: Identifying VSA OFF Switch And Switch Panel
    G05594787Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the VSA OFF switch 13P connector (B).
  4. Remove the VSA OFF switch (C) from the switch panel.
  5. Check for continuity between the VSA OFF switch 13P connector terminals No. 11 and No. 12. There should be continuity when the switch is pressed, and no continuity when the switch is released.
    Fig 2: Checking Continuity Between VSA Off Switch 13P Connector Terminals No. 11 And No. 12
    G05594788Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Check for continuity between the VSA OFF switch 13P connector terminals No. 1 and No. 5. There should be continuity at all times.
    Fig 3: Checking Continuity Between VSA Off Switch 13P Connector Terminals No. 1 And No. 5
    G05594789Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals