LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System Components >> DTC Troubleshooting >> DTC 84: VSA Sensor Neutral Position

DTC 84: VSA Sensor Neutral Position

  1. Do the VSA sensor neutral position memorization (see Sensor Cluster Replacement ).
  2. Clear the DTC with the HDS.
  3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
  4. Check for DTCs with the HDS.

    Is DTC 84 indicated? 

    YES  - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit (see VSA Modulator-Control Unit Removal and Installation ), and retest.

    NO  - The system is OK at this time.

scientia non olet · About LEMON Manuals