Vanity Mirror Light Test/Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Open the sunvisor.
Remove the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the vanity mirror light.

Fig 1: Identifying Vanity Mirror Light
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the No. 1 and No. 2 terminals.
- With the vanity mirror cover (B) opened, there should be continuity.
- With the vanity mirror cover closed, there should be no continuity.
If the continuity is not as specified, remove the lens (C) and replace the bulb (D) or the sunvisor.