Footwell Light Test/Replacement
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Carefully pry out the footwell light lens (A) and housing (B).
- Disconnect the 2P connector (C) from the light.
- Check for continuity between the No. 1 (+) and No. 2 (-) terminals. There should be continuity. If there is no continuity, check the bulb (C). If the bulb is OK, replace the footwell light.
- Install the parts in the reverse order of removal.