Hood Support Strut Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use eye protection when prying support strut clip.

With the help of an assistant, use a flat-tip screwdriver (A) to pry the support strut clips (B) of the support strut (C) on the hood and body, then release the support strut from the pivot bolts (D). Do not remove the clips from the support strut.

Fig 1: Hood Support Strut With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Apply multipurpose grease to each pivot.

Fig 2: Applying Multipurpose Grease To Each Pivot
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Set the clips (A) on the original position, then reattach the support strut (B) on the pivot bolts (C) by pushing on the support strut.