LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Lubrication) >> Oil Pressure Switch Replacement

Oil Pressure Switch Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
    Fig 1: Oil Pressure Switch With Torque Specification
    G05484828Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove any old liquid gasket from the switch and switch mounting hole.
  3. Apply a very small amount of liquid gasket to the oil pressure switch threads, then install the oil pressure switch.
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.
scientia non olet · About LEMON Manuals