LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Fuel And Emissions Systems) >> General Troubleshooting Information >> Scan Tool Clear Command

Scan Tool Clear Command

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

If you are using a generic scan tool to clear commands, be aware that there is only one setting for clearing the PCM, and it clears all commands at the same time (crank (CKP) pattern learn, idle learn, readiness codes, freeze data, on-board snapshot, and DTCs). After you clear all commands, you then need to do these procedures, in this order: PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ); crank (CKP) pattern learn procedure; Test-drive to set readiness codes to complete (see HOW TO SET READINESS CODES  ).

scientia non olet · About LEMON Manuals