Shift Lever Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift lever assembly on the console frame.

Fig 1: Shift Lever Assembly With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Assemble the center console by installing the following:
- Center console box (see CENTER CONSOLE BOX REPLACEMENT )
- Center console beverage holder (see CENTER CONSOLE BEVERAGE HOLDER REPLACEMENT )
- Center console panel (see CENTER CONSOLE LATCH PANEL REMOVAL/INSTALLATION )
- Center console latch panel (see CENTER CONSOLE LATCH PANEL REMOVAL/INSTALLATION )
- Console armrest (see CONSOLE ARMREST REMOVAL/INSTALLATION )
Install the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
Install the shift cable on the shift lever, and adjust the shift cable (see step 6 on ).
Install the beverage holder inner case (see step 10 of CENTER CONSOLE REMOVAL/INSTALLATION ).
Install the passenger's center console trim (see step 6 of CENTER CONSOLE REMOVAL/INSTALLATION ).