Starter Removal and Installation: Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Install the starter (A) using a new gasket (B), then install the harness clamp (C), and positive starter cable (D) and S terminal connector (E). Make sure the crimped side of the B terminal is facing out, away from the starter.

Fig 1: Starter Remove \ Install Replacement Components With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the battery base and battery (See step 62 on ENGINE INSTALLATION .
Install the air cleaner assembly (see AIR CLEANER ELEMENT INSPECTION/ REPLACEMENT ).
Do the battery terminal reconnection procedure (See RECONNECTION ).
Start the engine to make sure the starter works properly.