Subwoofer (Without navigation)
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right rear side trim panel (see TRIM REMOVAL/INSTALLATION - REAR SIDE AREA ).
- Disconnect the 8P connector (A), then remove the bolts, nuts and pull out the subwoofer (B).
- Measure the resistance between the No. 2 and No. 7 terminals and No. 3 and No. 8. There should be about 2 Ω.
- If the resistance is not as specified, replace the subwoofer.