LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Gauges) >> Multi-information Switch Test/ Replacement

Multi-information Switch Test/ Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
  2. Disconnect the 20P connector (A) from the cable reel.
    Fig 1: Identifying 20P Connector From Cable Reel
    G05488133Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Measure the resistance between the cable reel 20P connector No. 14 and No. 15 terminals in each multi-information switch position according to the table.
    RESISTANCE SPECIFICATION

    Position Resistance
    Previous (↑ triangle) About 33 Ω
    SEL/RESET About 1,023 Ω
    Next (↓ triangle) About 363 Ω
  4. If the resistance is not as specified, replace the steering switch assembly.
    NOTE: If the switch is OK, but there is a problem with the switch function, check the cable reel.
scientia non olet · About LEMON Manuals