LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Under-Dash Fuse/Relay Box) >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do the battery terminal disconnection procedure, and wait at least 3 minutes.
  2. Remove the left kick panel (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  3. Disconnect the connectors from the fuse side of the under-dash fuse/relay box (A).
    Fig 1: Identifying Under-Dash Fuse/Relay Box
    G05487841Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the mounting bolts, and pull the fuse/relay box away from the body.
  5. Disconnect the connectors from the back side of the under-dash fuse/relay box, then remove the under-dash fuse/relay box.
  6. Carefully remove the relays by prying under the base of the relay.
    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
scientia non olet · About LEMON Manuals