Gear Selection
The shift lever has six positions; P: PARK, R: REVERSE, N: NEUTRAL, D: DRIVE 1st through 5th gear, and 1st through 3rd gear with D3 driving mode, 2: 2nd gear, and 1: 1st gear.
GEAR POSITION CHART
| Position | Description |
|---|---|
| P: PARK | Front wheels locked; the park pawl engaged with the park gear on the secondary shaft. All clutches are released. |
| R: REVERSE | Reverse; the reverse selector engaged with the countershaft reverse gear and the 5th clutch engaged. |
| N: NEUTRAL | All clutches are released. |
| D: DRIVE (1st through 5th) | General driving; starts off in 1st, shifts automatically to 2nd, 3rd, 4th, then 5th gear, depending on the vehicle speed and the throttle position. Downshifts through 4th, 3rd, 2nd, and 1st gear on deceleration to stop. The lock-up mechanism operates in 2nd, 3rd, 4th, and 5th gears. |
| D: DRIVE with D3 driving mode (1st through 3rd) | Used for rapid acceleration at highway speeds and general driving; up-hill and down-hill driving; starts off in 1st, shifts automatically to 2nd, then 3rd gear, depending on the vehicle speed and the throttle position. Downshifts through 2nd to 1st gear on deceleration to stop. The lock-up mechanism operates in 2nd and 3rd gears. |
| 2: SECOND | Used for engine braking or better traction starting off on loose or slippery surfaces; stays in 2nd gear; does not shift up or down. |
| 1: FIRST | Used for engine braking; stays in 1st gear; does not shift up. |
| Starting is possible only in P and N because of a neutral-safety switch. | |