LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey EX >> Repair and Diagnosis >> Engine Performance >> System >> Variable Cylinder Management (VCM) System >> Rocker Arm Oil Pressure Sensor Removal/Installation

Rocker Arm Oil Pressure Sensor Removal/Installation

  1. Remove the engine cover (see step 9 on ENGINE REMOVAL ).
  2. Disconnect the rocker arm oil pressure sensor 3P connector (A).
    Fig 1: Rocker Arm Oil Pressure Sensor And Connector With Torque Specification
    G05523977Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the rocker arm oil pressure sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals